Our choice for unsurpassable adhesion. Mix Clifton Accelerator with
Clifton Hypalon Adhesive for a better bond and faster cure time.
- Ratio: 0.8 oz. Accelerator to 1 Gal. of Adhesive.
- Be sure to follow ratio instructions carefully. Too much accelerator will de-activate the glue.
- Clifton Accelerator can be mixed with Clifton Urethane Adhesive. It
will not increase the bond strength, but will increase heat and chemical
resistance of the bond. If the material bonded will be subjected to
temperatures greater than 140º F, use of the accelerator is recommended.
Flammable ItemSPECIFICATIONS:
- Includes Instruction Sheet and MSDS Sheet
- Shelf Life: Good as Long as Liquid Still Remains
- Comes with Measuring Pipet
- Mixing Ratio is 0.8 oz. (24 mm) of Accelerator for Every Gallon (128 oz.) of Adhesive
